Using Ticket+ Printer Configuration Software; Running Ticket; Connecting The Printer To A Host Computer - Mettler Toledo APR320 Manual De Usuario

5 Using Ticket+ Printer Configuration Software

Ticket+ is a printer configuration software that is provided with the printer. The software is used to customize
printer settings and printer formats.
To download Ticket+, please visit www.mt.com/apr320.

5.1 Running Ticket+

Double click
priate language and click SET to run.

5.2 Connecting the Printer to a Host Computer

To use Ticket+, ensure the printer is connected to a host computer through one of the following methods.
Note: Make sure the PC Mode (in Menu Mode > Printer Setting) is set as Off.
1 Switch on the printer.
2 Connect the printer and the host computer through a USB cable, a RS232 cable or a Ethernet cable.
3 Run Ticket+.
4 Select the appropriate connection interface from
Interface. Selections include USB, COM and Network
Port.
5 If COM is selected, enter the serial settings of the printer
in the pop-up screen. If the printer has Auto
Connection enabled, wait until the pop-up screen
appears. Click SET.
Ticket Printer
icon to open Ticket+. Select the appro-
Language
Please choose your language.
Language
English
Don't show again.
CANCEL
Interface
USB
USB
COM
Network Port
Port
Baud Rate
Bits/Parity
Stop Bit
Handshake
NONE
Using Ticket+ Printer Configuration Software​ ​
SET
CONNECT
SET
17