Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
A
M6x12
x16
Note: SRTH12UB model shown. Size and dimensions will differ by model.
x1
Required Tools:
• 8.8 Flange Head Cap Screw Socket and Wrench (User-Supplied)
• 5/32" (4 mm) Allen Wrench (Supplied)
• #1 Phillips Screwdriver (User-Supplied)
WARNING: The unit is extremely heavy. Do not attempt to unpack, move, assemble or install without
assistance. Until it has been properly assembled and stabilized, the unit could cause property damage
and/or personal injury. Use extreme caution when assembling the unit and be sure to follow all handling
and installation instructions. Do not attempt to install equipment without first stabilizing the unit. Refer to
Owner's Manual.
Parts List
B
#1 Phillips
M4x8 with
Lock Washer
x41
x4
x1
x2
C
8.8 Flange
Head Cap Screw
x4
x2
x2
x2
2
D
Ground Wire
x6
x1
Publicidad
Tabla de contenido
