Assembly - Watson Marlow Pumps 620RA Serie Manual Del Usuario

8.2

Assembly

Fitting the track
Any one of three tubing input/output positions can be selected .
Ports Right
Ensure the drive/motor flange mounting threads are free from dirt or oil.
l
Select the required orientation then fit the track over the drive shaft and locating boss.
l
Align the track horizontally/vertically so the four location holes are aligned with the threaded
l
gearbox holes.
Secure the track to the drive with the four retaining screws supplied using a suitable "No 2 Pozi-drive"
l
screwdriver.
Ensure the earth terminal on the track is connected to earth.
l
PB0347:m-620atex-en-03
Ports Down Ports Left
12