General Machine Maintenance; Lubrication - Nilfisk-Advance 7765 Serie Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

A-28 / ENGLISH

GENERAL MACHINE MAINTENANCE

4
1
5

LUBRICATION

100 Hour Lubrication
1.
Lubricate drive wheel swivel, wheel bearings and steering rack guide (see next page).
2.
Lubricate front wheel bearings.
3.
Lubricate all moving joints.
4.
Lubricate all bushings with Loctite
cylinder, squeegee lift cylinder, main broom lift cylinder, both threaded ends of the throttle cable and on the variable dump door cylinders.
(Refer to the relevant sections in the Service Manual and the Parts List.)
250 Hour Lubrication
5.
Lubricate squeegee casters.
6.
Lubricate governor linkage (Diesel).
Use high quality multipurpose grease. Avoid using excessive amounts of grease.
A-28 - FORM NO. - 56041801 - 7765
6
3
Lubrication Points - FIGURE 23
Silver Grade Anti-Seize compound. Note that the bushings are located on the steering, scrub deck lift
®
3
2
4
4
revised 1/14

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido