Mounting The Unit - JetNet 3008G Serie Guía De Instalación Rápida

Introduction
JetNet 3008G/3005G Industrial Full Gigabit Ethernet Switch, conforming IEEE 802.3,
802.3au and 802.3ab standard, supports 8 (5) 10/100/1000BaseTX. The JetNet
3008G/3005G adopts rugged metal case design to operate in harsh environments (-10~70
It also provides IP-31 standard protection. It features one relay output to alarm users if a
port link fails or with the power fails. Alarms can be enabled/disabled by a dip switch. JetNet
3008G/3005G is recommended to be powered by DC 24V with 12~48V range from the 6-pin
removable terminal block.
Package contents Check List
Box contents
4JetNet 3008G/3005G Switch
4Quick Installation Guide

Mounting the Unit

4Din-Rail mount: Mount the din-rail clip screwed on the
rear of JetNet 3008G/3005G on the DIN rail.
Grounding JetNet 3008G/3005G Switch
There is one grounding screw on the bottom
side of JetNet 3008G/3005G. Connect
the earth ground screw of switch to the
grounding surface to ensure safety and
prevent noise. See, Figure-1
JetNet 3008G / 3005G Series
Industrial Full Gigabit Ethernet Switch
Quick Installation Guide
V1.0
Figure-1
Earth Ground
Screw
Alm
PW1 PW2
Alarm Control
port 1~8 power
Earth Ground
Warning: Do not connect to AC line-Natural
o
C);
www.korenix.com