CONNECTIONS
DC in jack
1
Audio out (L) jack
2
Audio out (R) jack
3
Video out jack
4
Connecting Power Source
1.
Place the unit on a flat, stable surface.
2. Connect AC adaptor (provided) into the DC IN jack (1) on the back panel
of the unit and plug the the other end to the mains outlet.
Connecting the Microphone
Connect the microphone into MIC 1 jack (6) on the back panel as well as
MIC 2 jack (7) on the back panel (when desired).
Note: Do not drop or tap the Microphone as damage to the Microphone
or speakers may occur. Do not twirl the microphone by cord as it will
cause damage to the encased wiring.
Line out jack
5
Microphone in jack 1
6
Microphone in jack 2
7
EN
27