sunjoe HJ605CC Manual Del Operador página 9

2. When the pole reaches the desired length, latch the
telescoping lock by pushing it back down (Fig. 10).
Fig. 10
Telescoping lock
Attaching the Telescoping Pole
(Optional)
m
WARNING!
Make sure the power ON/OFF switches
in both the unit and the telescoping pole are in OFF position
before attaching the telescoping pole.
1. Turn the telescoping pole upside down. Press the end of
the cutting head lock; the front part of the lock will go up
(Fig. 11).
Fig. 11
Cutting head lock
2. While pressing the cutting head lock, align the grass shear
+ hedge trimmer with the pole head, and insert the grass
shear + hedge trimmer into the opening of the pole head.
Release the cutting head lock when the grass shear +
hedge trimmer fits into place (Fig. 12).
Fig. 12
Grass shear +
hedge trimmer
3. Insert the connecting cord into the telescoping pole
socket on the handle of the grass shear + hedge trimmer
(Fig. 13).
Fig. 13
Telescoping pole
socket
4. To disconnect the grass shear + hedge trimmer from the
telescoping pole, unplug the connecting cord from the
telescoping pole socket, and remove the grass shear
+ hedge trimmer from the pole head while pressing the
cutting head lock (Fig. 14).
Fig. 14
Cutting head lock
Grass shear +
hedge trimmer
9
Pole head
Connecting
cord
Pole head