Before Assembly - Craftmade Warbirds WB448MA Manual Del Usuario

Read and Save These Safety Precautions
lectricity at main switch before wiring or servicing fan in order to avoid
ectrical shock.
must be in accordance with the National Electric Code (ANSI/NFPA 70-
local electrical codes. Electrical installation should be performed by a qualified
ectrician.
ing the wire connections, the wires should be spread apart with the grounded
and the equipment-grounding conductor on the one side of the outlet box
ngrounded conductor on the other side of the outlet box.
s after being made should be turned upward and pushed carefully up into
box.
r of a fan identified as grounded conductor to be connected to grounded
of power supply, conductor of a fan identified as ungrounded conductor to
ted to an ungrounded conductor of power supply, conductor of fan identified
ment grounding to be connected to an equipment-grounding conductor.
d not be mounted in an area where it might get wet.
the risk of fire, electric shock or personal injury, mount to outlet box marked
le for Fan Support" and use mounting screws provide with the outlet box.
and best operating results, we recommend that you have a qualified electrician
and install your fan.
NG: To reduce the risk of fire or electric shock, do not use this fan with any
speed control device.
the risk of personal injury, do not bend the blade brackets when installing
ts, balancing the blades or cleaning the fan. Do not insert foreign objects
n rotating fan blades.

Before Assembly

e that the fan voltage (120) is compatible with your own electrical system.
make sure that your carton contains all the parts mentioned in the parts list.
the motor is taken out of carton, please put it in a soft cloth to prevent any
ornamental surface.
efore installing, choose a location for mounting the fan where the blades have
of clearance from all objects and floor. Mount an outlet box to the ceiling or
box.
Do not mount fan to sheet rock or drywall type materials. To insure proper
he two #1 wood screws to secure mounting bracket to joist or beam. If the
hoose does not have a suitable support beam, install a 2"X4" brace between
o support.
Tools You Need
Screwdriver 2. Adjustable Wrench
All manuals and user guides at all-guides.com
1. Mounting Plate
2. Fan Motor/
3. Globe
4. Blades
5. Balance kit
Screw Package
S1. Wood Screws
S2. Screws & Washer for
S3. Outer Housing Screws
S4. Blade Screws
S5. Wire Connectors
S6. Pull Chains
S7. "J" Hook
S8. Zip Tie
3. Needle Nose Pliers
What You Have
Parts Quantity
Outer Housing
Tiger Shark Model
Quantity
& Washers
Mounting Plate
13
Tiger Shark Model 10
1
1
1
4
3
1
4
3
S1
2
S2
2
S7
3
S3
3
S4
2
1
1
S5
S6
1
2
S8
®