Zwilling ENFINIGY 53103-3 Manual Del Usuario página 17

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
EN
consumption. For this reason, do not
connect the appliance to multiple
sockets or extension cables.
Make sure that the power cord is not
kinked or pinched and make sure that
the power cord and the appliance do
not come in contact with sources of
heat (e.g. hobs, gas flames).
When unplugging the appliance,
always pull the plug, not the power
cord. Do not carry the appliance by
the power cord.
Never touch the power plug with wet
hands.
In the event of danger or a defect,
immediately unplug the appliance. For
this reason, keep the socket the appli-
ance is connected to easily accessible
at all times.
Unplug the appliance from the socket
prior to cleaning it.
Never unscrew the appliance and do
not make any technical modifications.
Never immerse the appliance in water
or other liquids, do not clean it under
running water and never put it in the
dishwasher.
When the appliance is switched on,
there is a risk of scalding from hot water
or hot steam:
Do not move or transport the appli-
ance while the brewing is in process.
Water may spoil if it is left in the appli-
www.zwilling.com
ance for several days:
Do not leave any water in the appli-
ance when it is not in use. Pour out
any water that is not needed. Clean
the appliance regularly.
A faulty appliance can cause dam-
age and injuries:
Always check the appliance for
damage prior to use. Do not use the
appliance if the glass jug has cracks.
Only use suitable original ZWILLING
glass jugs. Use the jug carefully, as it
is fragile.
Never operate a faulty appliance.
Never operate an appliance that has
been dropped.
In the event of a defect or a dam-
aged connection cable, the device
must be repaired by the manufacturer,
its customer service or a similarly
qualified person in order to avoid
a hazard. The appliance does not
contain any parts that you are able to
repair yourself.
Damage may occur if the appliance
is handled incorrectly. Place the appli-
ance on a dry, even surface that is not
slippery.
Do not place the appliance on a
hot surface or in the vicinity of strong
sources of heat.
Do not place the appliance on a
surface that could be damaged
by water and heat (e.g. untreated
Safety
17

Publicidad

Tabla de contenido
loading

Tabla de contenido