PNI SafeHome PT720MW Manual De Usuario página 8

Symbols description
Access the menu
Confirmation
Up/Down
Volume +/Volume -
Call transfer
Internal call
Image settings
Refresh
Monitor
Talk
User manual
In the standby mode, press this button to
enter the settings menu.
Once you access the menu, push this button
up or down to navigate the menu.
Press this button to enter a specific menu
item and confirm a setting.
In Intercom mode, press this button to stop/
restart recording. If you are in capture mode,
press this button to capture an image.
While playing audio, video or photo files, press
this button to Stop or Play.
In playback mode, long press this button to
adjust the volume. The volume bar will appear
on the screen.
Turn this knob up and down to adjust the
volume of the indoor unit.
In the standby mode, press and hold to make
an internal call.
During an external call, press to transfer the
call.
In Intercom mode, press to make the following
settings: brightness, contrast, saturation,
volume (adjust the sound from the external
unit).
Refresh: when connecting to the indoor unit
PAL/NTSC CCTV cameras or the included
outdoor camera and a CVBS/AHD CCTV
camera or only the included outdoor camera
and no image appears on the monitor, press
the "R" symbol on the screen.
Select the video source.
Click to talk to the visitor
8