Basic Safety Instructions - Conergy IPG Serie Instrucciones De Servicio

2 Safety
2.1.4
8
| that vehicles are only loaded or unloaded by the industrial truck
if they have been secured against rolling and tilting;
| that no persons are endangered when the industrial truck is in
motion;
| that loads are not deposited in traffic routes and escape paths or
in front of safety equipment and operating equipment which must
remain accessible at all times;
| that no persons are carried together with the load or with the
industrial truck;
| that loads are not transported over the heads of other workers;
| that a protective beam has been fitted to the fork tines when the
truck is travelling unloaded.

Basic safety instructions

Danger to life due to lack of assistance!
In the event of an accident a second person can lend assistance.
| Only carry out work if a second person is present.
Risk of fatal injury due to high voltages!
Death or serious injury could result when working on electrical
systems and live parts, especially with high levels of voltage and
current!
| Cover or shield any adjacent live components.
| Before starting any work on electrical systems:
| Disconnect the device
| Secure the device against being switched on again
| Verify that the system is fully deenergised
| Earth and short-circuit the device
Risk of fatal injury through disregard of safety instructions!
If the sequence of steps for installation and the safety instructions
are not followed, the device may be permanently damaged and
electrical accidents may occur with serious consequences for life
and health.
| Observe the sequence of procedure steps for installation and
follow the safety instructions.
Damage due to blocked ventilation!
Foreign materials left on the device which obstruct the ventilation
will cause a risk of damage and losses in yield.
| Do not leave foreign material on the device.
Operating manual Conergy IPG series central inverters