Conergy IPG T Serie Instrucciones De Servicio página 113

7 Maintenance and disassembly
Result
50
Loosen the cables
1. Unscrew the CAN cable connection pieces.
2. Pull out the connection cable.
3. Loosen the solar power system cables:
| Press in both connector plug snap clips.
| Remove the solar power system cables.
(1)
7.1: Loosening the power cable
4. To loosen the power cable:
Deactivate the fixing element (1).
|
| Turn the bayonet connection anticlockwise and
disconnect the mains plug.
5. Seal all connections with sealing plugs.
Fit sealing plugs correctly and securely. Otherwise, the
connections will not be protected against humidity.
Cables are loosened.
Operating manual
Conergy IPG T series