Safety Instructions; Warranty Disclaimer - Hama 210499 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
G Operating Instructions
Thank you for choosing a Hama product. Take your time
and read the following instructions and information
completely. Please keep these instructions in a safe place
for future reference.
1. Explanation of warning symbols and notes
arning
W
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
ote
N
This symbol is used to indicate additional information
or important notes.

2. Safety instructions

• Use the product only for the intended purpose.
• Protect the product from dirt, moisture and
overheating and use it in dry environments only.
• When using this product, observe the applicable local
traffic laws and regulations.
• Do not drop the product and do not expose it to any
major shocks.
• Keep the packaging material out of the reach of
children due to the risk of suffocation.
• Dispose of packaging material immediately in
accordance with the locally applicable regulations.
• Do not modify the product in any way. Doing so voids
the warranty.
3. Installation
arning
W
• Take care that components such as airbags, safety
areas, controls, instruments, etc. and visibility are
not blocked or restricted.
• While driving a car or using sports equipment, do
not allow yourself to be distracted by your product
and keep an eye on the traffic situation and your
surroundings.
ote
N
Never apply force when using the product or during
installation.
3
3.1 Mounting the holder
• Remove the protection foil from the suction cup and
position it on a clean, level surface (e.g. window
pane).
• If necessary, attach an adapter plate for suction cup
holders on an uneven, rough surface (e.g. dashboard).
• Open the clamping device (A1) in order to position the
support arm.
• Close the clamping device (A1) in order to fix this
position.
• To remove the suction cup from the surface, open
the clamping device and remove the suction cup (A2)
completely.
3.2 Mounting the bracket
• Place the cutout(s) of the bracket on the holder.
• Push the bracket down until it clicks into place / sits
firmly.
3.3 Inserting / removing devices
ote
N
Always remove your device from the bracket before
you attach it to or remove it from the holder (suction
cup holder).
• Please fold out the feet (B1) before using the device.
• Press the (B2) button to open the
holding brackets (B3).
• Insert the device and fix it in place by gently pressing
the holding brackets (B3) together.

4. Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides
no warranty for damage resulting from improper
installation/mounting, improper use of the product or
from failure to observe the operating instructions and/
or safety notes.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

00210499

Tabla de contenido