Standards And Technical Directives - Conergy SmartControl System Manual De Uso

Conergy SmartControl System
1.6

Standards and technical directives

The Conergy SmartControl System and its hardware
components (ET sensor, Conergy SmartControl and power
supply unit) comply with the following standards and
directives:
| 89/336/EC: Directive of the Council on the harmonisation of
the laws of the Member States relating to electromagnetic
compatibility (amended by 93/97/EC)
| 73/23/EC: Directive of the Council on the harmonisation of
the laws of the Member States relating to electrical
equipment designed for use within certain voltage limits
(amended by 93/68/EC)
| DIN EN 60950-1 Information technology equipment - Safety
- Part 1: General requirements
| DIN EN 61000-6-2:2006 Electromagnetic compatibility
(EMC) Generic standards: immunity for residential,
commercial and light industrial environments
| DIN EN 61000-6-3:2005 Electromagnetic compatibility
(EMC) Generic standards: immunity for heavy industrial
environments
The power supply unit additionally complies with the
following standard:
| DIN VDE 0100-410, SELV
The CAN converter additionally complies with the following
standards:
| DIN EN 61000-4-2:2001 Electromagnetic compatibility
(EMC) Testing and measurement techniques - Electrostatic
discharge immunity test
| DIN EN 61000-4-3:2003 Electromagnetic compatibility
(EMC) Testing and measurement techniques - High
frequency electromagnetic field immunity test
| DIN EN 61000-4-4:2005 Electromagnetic compatibility
(EMC) Testing and measurement techniques - Electrical fast
transient disturbance immunity test
| DIN EN 61000-4-5:2001 Electromagnetic compatibility
(EMC) Testing and measurement techniques - Surge
immunity test
Operating manual
1 Introduction
7