Conergy SmartControl System Manual De Uso página 9

1 Introduction
8
| DIN EN 61000-4-6:2003 Electromagnetic compatibility
(EMC) Testing and measurement techniques - Conducted
disturbances, induced by radio frequency fields immunity
test
| DIN EN 61000-4-11:2005 Electromagnetic compatibility
(EMC) Testing and measurement techniques - Voltage dips,
short interruptions and voltage variations immunity test
Please note that the above legal regulations may have been
modified since completion of this operating manual.
Note that countries outside the Federal Republic of Germany
have their own national directives, laws and safety
regulations.
The Conergy SmartControl and the CAN converter contain a
program code which is subject to the eCos License. The
adapted eCos source code can be found via the following
link:
http://www.sunreader.de/ecos/
The eCos license can be found via the following link:
http://ecos.sourceware.org/ecos-license/
The Conergy ControlCenter software uses Measurement
Studio (Copyright © 2007 National Instruments Corporation.
All Rights Reserved).
Operating manual
Conergy SmartControl System