Dab Radio - auna Silverstar Amp Manual Del Usuario

DAB RADIO

DAB radio mode receives DAB/DAB+ digital radio and displays information
about the station, stream and track playing. To enter DAB mode, either
press mode and rotate the knob to cycle through the listening modes until
DAB Radio is displayed, or select Menu > Main menu > DAB. The DAB radio
mode menu offers the following options:
• Station list
• Scan
• Manual tune
• Prune invalid
• DRC
• Station order
• Main Menu
Station List
The first time you select DAB radio mode, or if the station list is empty, radio
automatically performs a full scan to see what stations are available. You
may also need to start a scan manually to update the list of stations for one
of the following reasons:
• Available stations change from time to time
• If reception was not good for the original scan (for example the antenna
was not up), this may result in an empty or incomplete list of available
stations.
• If you have poor reception of some stations (burbling), you may wish to
list only stations with good signal strength.
A question mark before a station in a list indicates that station is currently
unavailable. Depending on the cause of the loss of signal this may be only
temporary. Stations that unlikely to be available again (for example you
have moved out of the broadcast range of a station), can be removed from
the station list.
Scan for stations
To start a scan manually, select Menu > Scan. Once the scan is complete,
the radio shows a list of available stations. The manual tune menu option
allows the user to select a particular channel and display the signal strength
for that channel.
Remove stations from list
To remove stations that a listed but unavailable, select Menu > Prune
invalid.
EN
49