Installation
05. Screw on the mounting hooks with the
angled part facing outwards. Fig. 4.
06. Screw the support screws.
07. Rest the back of the hood on the wall
and let the hoods enter the
corresponding slots.
08. Holding the cross notched screwdriver
in your hand, slowly screw up the 2
horizontal alignment screws, until the
hood is perfectly horizontal above the
cooker hob. Fig. 5.
09. Insert and fix with the screw-driver the
safety screws.
10. Insert the screws in the holes of the
upper chimney bracket and screw
them in the plugs.
12. Connect the hood to electricity supply.
12. Connect the air outlet pipe.
13. Mount the two parts of the chimney
fixing on the side the upper part with
2 screws at the chimney bracket
12