SBS TTHEALTBRACELETK Manual Del Usuario página 5

above.
2 . When the alarm is OFF ( OFF) appears
on the display.
3. When its alarm time, the logo lights up
to 20s and the bracelet vibrates for 20s.
Then it goes into power saving mode.
Bluetooth PIC. 11
To indicate the success of the
synchronization, the display shows the
following images:
FEATURES AND OPERATIONS PIC. 12
1. Open the application and press
DEVICES. Each press of the key K1
turn on the display. The bracelet will
automatically synchronize with the
application. If the synchronization is
successful, the screen displays √ for
3s and the bracelet vibrates for 1s. If
synchronization fails, the screen shows
× for 3s and the bracelet vibrates for 1s.
A vibration indicates the coupling
occurred in each mode.
Warning: the image above is only shown
if the cuff is synchronized.
Reminder exercises function.
PIC. 13
Display:
1. Memo exercises shown on the above
2. The image flashes at a frequency of
1 Hz
Note: The previous function is shown
only when you open the application on
your phone and is synchronized with the
bracelet. When is the time you set, the
bracelet vibrates for 20s.
Control of sleep and wake-up mode
PIC. 14
Select on the phone's display the
application shown below.
1. Press K1 for 3s in any mode. You will
enter Sleep Monitor ( checking of sleep)
2. In Sleep mode, press 3 times to
activate the bracelet and return to the
previous mode.
PIC. 15
CHARGING MODE - PIC. 16
The bracelet is recharged using the USB
cable supplied
COMPATIBILITY - PIC. 17
The bracelet is compatible with iOS 6.0
and above and with Android 4.2.2 and
above.
NOTICES
• Do not groped to open or repair the
device
• Clean frequently when in use, using
a damp cloth. Do not put in contact
with chemicals or gasoline, solvents,
gasoline, alcohol, insect repellents, as
they may damage the product or its
components
• Protect from excessive heat, bumps
and prolonged exposure to sunlight.
• Do not bend or twist
• Keep away from children
• Do not drop into the water and store in
a covered, dry and ventilated place.
_____________________________
DIRECTIVE 2002/96/EC OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 27
January 2003 on waste electrical and
electronic equipment (WEEE)
Information for users
(a) the device requirement not to dispose of
WEEE as unsorted municipal
waste and to collect such WEEE separately;
(b) the device must return and collection
systems available to them;
(c) the device will be collected by the vendor in
case of a new one is buyed
(d) the device not correctly disposed has
potential effects on the environment and
human health
as a result of the presence of hazardous
substances in electrical and electronic
equipment;
(e) The symbol indicating separate collection
for electrical and electronic equipment
consists of the crossed-out wheeled bin, as
shown below. The symbol must be printed
visibly, legibly and indelibly.
5