Safety Information
Follow operating instructions carefully.
• Do not use meter if it is wet or damaged. Electric shock or damage to meter
may result.
• Do not perform any service or maintenance other than that described in
these instructions. Electric shock or damage to meter may result.
• Do not touch probe ends. Electric shock may result.
• Do not attempt to take measurements greater than 600 ACA or 750 VAC.
Electric shock or damage to the meter may result.
• Do not connect a source of voltage with the Range Selector Switch in the
Ω (ohms) position. Personal injury or damage to the meter may result.
• Turn meter OFF and remove it from the item being tested before replacing
battery. Do not use the meter until the back is in place and fastened securely.
Failure to observe these warnings may result in severe injury or death.
All manuals and user guides at all-guides.com
A person who has not read and does not understand all
operating instructions is not qualified to operate this
tool.
Failure to read and understand safety instructions may
result in severe injury or death.
Electrical Shock Hazard.
Contact with live circuits will result in severe injury
or death.
AC Clamp-On Meter
3