Settings Table - Greenlee CMT-60 Manual De Instrucciones

All manuals and user guides at all-guides.com
Operation
1. See the Settings Table. Set the selector to the proper setting.
2. See Typical Measurements for specific measurement instructions.
3. Test the unit on a known functioning circuit or component.
• If the unit does not function as expected on a known functioning
circuit, replace the battery.
• If the unit still does not function as expected, send the unit to Greenlee
for repair. See the address shown under Warranty.
4. Take the reading from the circuit or component to be tested.
Note: Press the HOLD button to hold the present measurement on the
display; press again to return to the normal display mode

Settings Table

To measure this
characteristic ...
AC Current
AC Voltage
DC Voltage
Continuity*
Resistance
* Refer to the Accuracy section for tone indications.
set the selector to a measurement range
indicated by this symbol ...
A
V
V
CMT-60
7