Hotspot Mode; Activating Wifi; Downloading And Installing The Venta Home App; Setting Up Wifi - Venta AirSense ECO AS100 Manual De Instrucciones

ENGLISH

Hotspot mode

During initial startup, the device is automat-
ically in hotspot mode after initialization
(startup) and is ready for network setup: the
LED strip flashes blue continuously on both
sides.

Activating WiFi

Make sure your smartphone or tablet is con-
nected to your home WiFi network.
Downloading and installing the VENTA
Home App
The VENTA Home App lets you operate all of
your VENTA devices that have a WiFi function
easily via your smartphone.
This gives you a clear display of all meas-
ured values for each room at a glance. You
can immediately see when a critical value is
reached in a room and action is required. In
the event of critical values, the VENTA Home
App provides support with recommendations
for action as well as information on possible
causes. Detailed measured value analyses
can be created for all measured values; this
can help you draw conclusions on changes in
values due to everyday activities.

Setting up WiFi

After you have downloaded and installed the
VENTA Home App, please open the app and
follow the instructions on the screen of your
smartphone or tablet.
For more information please visit:
www.venta-air.com/en_gb/Service/Venta-Home-App/
16
Please make sure that...
•
You use a 2.4 GHz or a mixed 2.4/5 GHz net-
work, because the WiFi module in the device
does not support 5 GHz networks.
•
Your router supports 802.11b/g/n.
•
The iOS operating system version 13.0 or
newer, or Android version 8.0 or newer is
installed.
If necessary, update the operating system of
your smartphone or tablet.