Homewerks 7130-16-BT Manual Del Usuario página 8

INSTALLATION INSTRUCTIONS (continued)
9. Connect a 4 in. circular duct to the fan housing (A), securing it
with duct tape or a clamp. Vent the duct to the outside.
Turn on power source. Test the fan.
10. Join the connectors for the BLUETOOTH
light from the fan housing (A) to the grille (B). After push-
ing the two gray connectors firmly together, twist the plastic
nut to secure the connection. Repeat the same step for the
small black connectors. The grille (B) must be connected
BEFORE turning on power to the fan.
11. Attach grille (B) by pinching the mounting springs and
inserting them into narrow rectangular slots in the fan
housing (A).
Turn on power source. Test the unit.
speaker and LED
®
8
9
A
10
A
B
11
Housing slots
A
B
Black
connectors
Gray
connectors
Mounting
springs
Homewerks.com