Reggiani KYLIOS Instrucciones Para El Instalación página 13

KYLIOS | ENG |
OFF ON
1
3
2
www.reggiani.net
All manuals and user guides at all-guides.com
PREPARATION AND ASSEM-
BLY OF THE PROJECTOR
The KYLIOS product line consists of pro-
1
jectors ready for mounting on the Reg-
A
giani electrified 3-circuit tracks.
To engage the adapter with the Reggiani
3-circuit track (fig.1): observe the correct
direction when inserting adapter
locking lever
select circuit 1-2-3 in accordance with the
chosen power supply line
Deciding on the mounting direction of
the adapter results in selection of the
1
mounting direction of the luminaire. At
B
this point, the track mounted KYLIOS
luminaire can be installed because the
adapter also acts as mechanical support.
1
C
To assemble the projector,
turn the electricity off at
the mains and follow the in-
structions below.
; turn
A
;
B
.
C
011
ADJUSTMENT OF THE OPTICAL
COMPARTMENT
Two hands should be used to orient the
optical compartment, holding the bracket
with one hand and adjusting the optical
compartment with the other (fig.2).
This projector is extremely flexible and
can be adjusted through 356° on the hori-
zontal axis and by +/- 90° on the vertical.
2
3