Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Top Track
Outside Rail
Outside
Panel
8. Install the Outside Panel
NOTE: Perform these steps from outside the shower.
Lift the outside door panel with the rollers facing you and position the rollers on the outside rail.
Position the bottom of the door panel in the bottom track guide.
Check the panel for proper alignment and smooth operation. Adjust as needed.
Adjusting the Rollers
Loosen the roller screw(s) and move the roller(s) in the slot to align the panel.
Tighten the screws and reinstall the panel.
Install the Guide
Engage the guides in the front of the bottom track.
Slide the outside panel bottom flange into the groove of each guide.
Align the guide pin slot with the holes in the bottom flange.
Insert the guide pin through the guide pin slot and bottom flange hole. Push them in until they
snap into place.
Sterling
Roller
Inside of
Bath/Shower
Guide
Guide
Installed Guide
Front Panel
Bottom Flange
Fit bottom frame
flange into groove.
Bottom Track
Fit this section
of guide into
bottom track.
11
Guide Pin Slot
Guide Pin
Guide Pin Slot
1034041-2-A
Publicidad
Tabla de contenido
