Access Point; Operation.modes - Asus WL-138gE Manual Del Usuario

5.. Setting. up. your. wireless. interface.. To. set. up. your. wireless. interface,. follow. the. same.
instructions. from. 3. to. 5. as. above. Configurating. Wireless. Interface. in.Access. Point. mode.
on. page. 10.. You. can. change. to.AP. or. WDS(Bridge),. Station(Client),. or. URE(Repeater).
accordingly..Click.Save&Restart.to.restart.the.wireless.router.and.activate.the.new.settings.
8) Operation Mo��es
This.chapter.gives.information.on.the.operation.modes.of.the.ASUS.WL-320gE.Access.Point.
1) Bridge Mode (WDS)
Wireless.bridge,.also.known.as.Wireless.Distribution.System.or.WDS,.allows.you.to.connect.
to. one. or. many.Access. Points.. If. you. set. the. same. SSID. among. all. access. points,. wireless.
security.level.could.be.up.to.WPA-PSK..Otherwise,.security.level.is.WEP.only.

Access Point

AP. Mode. configures. the.ASUS. 802.11g.AP. for. a. specific. purpose.. By. default,. the.ASUS.
802.11g.AP.is.set.to.serve.as.an."Access.Point".where.a.wireless.mobile.client.can.connect.
wirelessly.to.a.wired.Ethernet.network.
WDS Only
With.WDS,.the.ASUS.802.11g.AP.can.only.communicate.with.other.Access.Points.
Hybrid
Hybrid.allows.you.to.use.the.ASUS.802.11g.AP.both.as.an.access.point.and.as.a.wireless.
bridge.
Channel
Both.Access.Points.in.Wireless.Bridge.mode.must.be.set.to.the.same.channel.
WL-320gE Access Point Quick Start Guide