Our warranty and responsibility requires that the usage and safety instructions are followed and that only
original spare parts and recommended hydraulic oil and lubricants are used.
The user of the machine is responsible for the safety checks, the maintenance and for ensuring that any faults are
corrected to avoid accidents.The user is responsible for ensuring that all National and Local Laws are complied with
This symbol means WARNING or DANGER - personal safety instruction!
Orwak 3100
is designed for ONE MAN OPERATION.
Only the operator is allowed in the working area.
The machine must not be used if the safety functions have been interfered with,
such as the removal or damage of protections, switches etc. Defective or removed parts
must be replaced by original spare parts.
The centre of gravity is located high up. If the machine needs to be moved, the press
plate must be lowered fully before moving.
Service and repair are only allowed to be performed by qualifi ed and
competent staff, and in accordance with the
The machine must not be used by under age persons.
Do not climb on the machine
Orwak 3100
The
is equipped with the following safety features:
Mechanical and electrical limit switches prevents the machine from being used when the press head is
moved. The door is mechanically protected and covers protect the operator from moving parts of the
machine.
Orwak 3100
The
is a hydraulically driven baler used to reduce the volume of bulky materials such as
paper, plastics and cardboard. The machine must only be placed in spaces with a roof, protection against
wind and normal lighting.
Materials easily set on fi re or of an explosive nature, drums with residual low fl ash point
liquids, or anything which could cause damage or explosion must not be compacted in the
machine.
All manuals and user guides at all-guides.com
3100
SAFETY INSTRUCTIONS
GB
Read the instructions BEFORE operating the Orwak 3100.
when using the machine.
SAFETY FEATURES
RANGE OF APPLICATION
ORWAK
service instructions.
4