Publicidad
All manuals and user guides at all-guides.com
Quick instruction:
1. Connect the croc clips ensuring the correct polarity
2. Plug the charger into the mains socket
3. Turn on the POWER switch
4. Automatic voltage detection
5. Charging current can be adjusted using the "MODE" button
6. If the temperature is below 5°C activate the "COLD
TEMPERATURE" mode by pushing the "MODE" button for 3 sec.
7. "REFRESH" starts automatically if the battery is deeply is
charged
8. The 100% LED will light when the battery is fully charged
Publicidad
