Main Section - Steren MIX-360 Manual De Instrucciones

MAIN SECTION

15. Effect feedback left channel: Allows to connect the left channel of an external effect device.
16. Effect f eedback right channel: Allows to connect the right channel of an external effect device.
17. Feedback input channel switch: Activate or deactivate a -20dB attenuation.
18. Feedback input channel level: Set the feedback input signal when connect an external effect
device.
19. Headphone input: Headphone jack. Power output: 3mW.
20. Headphone level control: Set the output signal level to headphones.
21. Echo FX control: Set the level of the Echo effect.
22. High EQ: Set the high frequency levels (+12dB), when you connect an external FX audio device
to Feedback jack. Attenuation level of 3.5kHz.
23. Low EQ: Set the bass frequency level when you have connected an external FX audio device.
Add depth to thin-sounding signals. Attenuation level of 100Hz.
24. FX Pan: Set the audio signal balance, right channel / left channel. If you want to hear both
channels, put the knob on the middle of stage. If you want to hear only the right channel, move the
knob to the right; of you want to hear the left channel, move the knob to the left of the stage.
25. Audio FX volume level control: Set the volume level for feedback channel or internal digital
audio FX.
26. Auxiliary output 1: Provides an output for monitors or auxiliary speaker system. Also you can
connect power sources.
27. Auxiliary output 2: Provides an output for monitors or auxiliary speaker system. Also you can
connect power sources.
28. Left channel output jack: Provides an output for monitors or auxiliary speaker system with a
connector type cannon.
8