Urrea UD80 Manual De Usuario Y Garantía página 11

16. °C / °F Switchable.
17. Laser ON/OFF.
18. 9 V battery.
1
5
4.3 °C/°F and battery change
The units is powered by 9V battery and displays temperatures in either
°C or °F . The user has to replace the battery when the battery voltage
drops below the voltage for reliable operation and at the same time
the low battery symbol
To change the 9V battery, pull open the unit's handle by using the
finger. Change the 9V battery with a new one and push the battery
cover back.
4.4 Advance function
To operate more advance functions, it is simply by using "F" button to
change. The sequential operations and the corresponding explanations
are shown in the following flow-chart.
• Scan and display the temperature during measurement.
• Continuously measure and display the temperature without pull the
measuring trigger.
• Activate the data record function when pull the trigger and recall
the stored data by using
to record, the new data will replace the existing data on the next
storage space).
• The maximum temperature within one shot measuring.
• The minimum temperature within one shot measuring.
• The average temperature within one shot measuring.
• The highest and lowest temperature difference within one shot
measuring.
2
6
7
3
8
4
9
10
11
will appear.
or
E S P A Ñ O L
12
13
14
15
button. (Note: while triggering
16
17
18
11