VBM REPLICA PISTONE Manual De Instrucciones página 61

8.2,
ELECTRICAL CONNECTION.
• Check that all the switches are in OFF position before electrically
connecting the machine.
• A grounding connection is absolutely obligatory and the system
must comply with the regulations in force in the country of
installation.
• Check that the power supply voltage corresponds to that of the
local mains.
•
Remove the grilles positioned on the cup heating plate (1).
•
Undo the two screws (2) and lift out the cup heating plate (1).
•
Unroll the electric cable (3) contained inside and let it run out through the lower
part of the machine.
•
Connect the electric cable (3) to a 16A pentapolar plug and connect it to the
electric system.
2
1
3
1
2
3
21