VBM REPLICA PISTONE Manual De Instrucciones página 63

9.1,
PREPARING THE MACHINE.
•
Check that the water supply tap upstream of the machine is open.
•
Check that the magnetothermal differential switch upstream of the machine is
set to ON.
•
Turn the switch (1) to "
automatically start to fill with water and once the level has been reached, the
light (3) will come on.
•
Turn the switch (1) to "
heating up indicated by the LED (4) coming on.
•
Wait until the set temperature has been reached indicated by the LED (4) going
off; the pressure indicated on the pressure gauge (5) must be 1,2 ÷ 1,3 bar (0.12
÷ 0,13 MPa).
•
Turn the switch (1) to "
elements; the LED (6) will come on.
•
Place the filter holders in the relative units.
•
Position the cups possibly facing up.
W ARNING: Only cups, mugs and glasses and no other objects may
be placed on the cup heating plate.
Dry the objects before placing them on the cup heating plate.
", the LED (2) will come on, the boiler will
", the water in the boiler will automatically start
" to start operation of the cup heating plate heating
9,
OPERATION.
5
3
1
2
4
6
23