Step2: Connect An External Device - Pioneer SX-N30AE Manual De Instrucciones

> Before Start > Part Names

Step2: Connect an external device

GAME
a Digital Optical Cable, b Digital Coaxial Cable
> Install > Initial Setup
b
a
> Playback
Supplementary information | Advanced Setup | Others
1. DIGITAL IN connection
Connect an external device with a digital optical cable or
digital coaxial cable. Note that this unit is equipped with an
"Opt Wakeup feature" so that when play starts on an
external device connected to the OPTICAL (GAME)
terminal, this unit comes on and the INPUT SELECTOR
automatically changes. (P29)
0 The default setting for "Opt Wakeup feature" is "Off". To
enable this function, press SETUP on the remote
controller, then in the Setup menu displayed set "3.
Hardware" - "Opt Wakeup" to "On". (P29)
0 Only PCM audio is supported for input through the
DIGITAL IN OPTICAL/COAXIAL jacks. Set the audio
output on the external device to output PCM.
BD/DVD
En 9