Doya_E.book Page 32 Thursday, November 11, 2004 10:50 AM
Loading the paper and replacing the ribbon cartridge
Additional information
Loading the paper and replacing the ribbon
cartridge
If paper runs out during printing
The PAPER indicator blinks slowly. Replace the paper-in tray. The remaining data is automatically printed.
Under normal circumstances the ribbon will end at the same time as the paper runs out. Replace the ribbon
cartridge with a new one.
If the ribbon runs out during printing
The RIBBON indicator blinks slowly. Wait until paper is ejected, and then replace the ribbon cartridge with a
new one. When you close the ribbon cartridge door, the remaining data will be automatically printed.
About used paper-in trays and ribbon cartridges
• Used paper-in trays can be used as container boxes for photographs.
• Paper-in trays and ribbon cartridges are made of plastic. When disposing, check local regulations.
EN-32
Index Sticker
Cap