Aqua Medic SP 1500 Manual De Instrucciones página 10

7. Maintenance
The pump hose and the motor are consumables and have to be maintained and changed regularly.
Pump hose: The pump hose has a lifetime of approx. 3 million rotations and after this usage, it
needs replacement. If the pump is operated continuously, the hose should be changed every 3 – 4
months. We recommend only to use an original Aqua Medic spare pump hose assembly which is
supplied complete with fittings.
Grease: Before the hose is installed it has to be greased. The pump will only operate properly if
the hose is effectively greased.
Heat: During continuous operation the motor may heat up as high as 70° C. This is normal and
has no effect on performance or the life. However, too little grease on the pump hose may cause
malfunction of the motor and overheating.
Drive wheel with rollers: The plastic drive wheel and the rollers are designed for a long life.
Nevertheless, it may become necessary to change it. The change can be done the following way:
Remove the pump hose by pushing the fittings out of the housing. The drive wheel can now be
pulled off the shaft as it is a pressed fitting.
Motor: The motor has a lifetime of > 10,000 hours. To replace the motor, remove the drive wheel
assembly. Undo the 4 screws in the backplate. Now, remove the backplate and protection plate.
Undo the power cable connection from the connector block and remove 2 screws securing the
motor to the housing. To fit the new motor reverse the above process.
Safety instructions
The pump may only be used indoors. Before undertaking any work on the pump, disconnect
the power plug from the mains!
8. Warranty
Should any defect in material or workmanship be found within 12 months of the date of purchase
AB Aqua Medic undertakes to repair or, at our option, replace the defective part free of charge –
always provided the product has been installed correctly, is used for the purpose that was intended
by us, is used in accordance with the operating instructions and is returned to us carriage paid. The
warranty term is not applicable on the all consumable products. Proof of Purchase is required by
presentation of an original invoice or receipt indicating the dealer's name, the model number and
date of purchase, or a Guarantee Card if appropriate. This warranty may not apply if any model or
production number has been altered, deleted or removed, unauthorised persons or organisations
have executed repairs, modifications or alterations or damage is caused by accident, misuse or
neglect. We regret we are unable to accept any liability for any consequential loss. Please note that
the product is not defective under the terms of this warranty where the product, or any of its
component parts, was not originally designed and / or manufactured for the market in which it is
used. These statements do not affect your statutory rights as a customer. If your AB Aqua Medic
product does not appear to be working correctly or appears to be defective please contact your
dealer in the first instance. Before calling your dealer please ensure you have read and understood
the operating instructions. If you have any questions your dealer cannot answer please contact
us.Our policy is one of continual technical improvement and we reserve the right to modify and
adjust the specification of our products without prior notification.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
-Technical changes reserved – 05/2015
10