Life Smart ZCHT1001US Manual Del Usuario página 12

OPERATING INSTRUCTIONS
4 . To set the timer power off, start the unit and
press the Timer button on the control panel
(C) or remote control (B) .
Note: The timer-power-off function can only be
set when the heater is in power-on mode .
The digital display on the control panel (C)
changes from the set temperature readout
to a time value for the timer . Press the Timer
button repeatedly to change the number value
between a range of 0 to 12 hours (in 1-hour
intervals) .
The Timer light turns on when the timer is set .
5 . To set the timer power on, while powering off
the unit press the Timer button on the control
panel (C) .
Note: The timer-power-on function can only be
set when the heater is in power-off mode .
The digital display on the control panel (C)
will indicate time value for the timer . Press
the Timer button repeatedly to change the
number value between a range of 0 to 12
hours (in 1-hour intervals) .
The Timer light turns on when the timer is
set .
6 . To replace the batteries, remove the battery
cover (1) from the remote (B) by applying
pressure to the battery cover (1) and sliding
it away from the remote (B) . Insert two AAA
batteries (not included) (2) and close the
remote by placing the battery cover (1) back
on the remote (B) .
Note: Do not mix old and new batteries . Do
not mix alkaline, standard (carbon-zinc),
or rechargeable (NiCad, ni-mh, etc)
batteries .
4
C
5
C
6
1
B
12
B
TIMER
B
TIMER
2