Resetting The System - Tanita AM-120E Manual De Instrucciones

Resetting the System

In the following situations, reset the system.
If you want all of personal settings and measurement values in the memory to be reset to [0].
Note: If you reset the system, you cannot restore any of the values or initial settings.
Note: The display screen switches to the setting screen after system reset. Refer to page 11,
and reset the initial settings.
Note: If you do not wish to reset the system, select [No] and press the SET button. The
display screen returns to the setting screen.
1) Press and hold the SET button for
more than 2 seconds while today's
values are shown in the display.
The display switches to the setting
display, and the [Hour] in the time
display flashes.
2) Press and hold the CLEAR button
for more than 5 seconds, and [Clr]
and [No] are displayed.
3) Press the
button to change the display to
[Yes].
4) Press the SET button to complete
the system reset.
29
memory/ MODE
Eng