Intended Use; Parts Description; Technical Data; Scope Of Delivery - Miomare IAN 274849 Instrucciones De Montaje

Introduction
List of pictograms used
Read the instructions!
Observe the warning and
safety instructions!
Risk of fatal injury and accidents
for infants and small children!
Bath & Shower Mixer Tap
Introduction
Congratulations on the purchase of your
new product. You have selected a high
quality product. The assembly and oper-
ating instructions are part of this product. Please care-
fully read these assembly instructions / instructions
for use before use and observe all instructions. These
instructions contain important information about in-
stallation, settings and care. Please retain these instal-
lation instructions / instructions for use and hand them
on to any future owner.

Intended use

The product is only designed to regulate the hot and
cold water flow. For tub installation only. Suitable
for use with all pressure-resistant hot water systems
such as central heating, continuous-flow water heat-
er, pressure boiler etc. This product is not suitable for
low pressure water heaters or pressure-free small
storage reservoirs, e.g. wood- or coal-burning do-
mestic hot water heaters, oil or gas-fired hot water
heaters, or open electrically heated cylinders. When
in doubt please consult a plumber or heating spe-
cialist. Any use not specified or product modification
is prohibited and will result in damage. Any form of
use other than the stipulated intended purpose can
cause danger to life and cause injury. The product
is for private use only and is not intended for medi-
cal or commercial use. The manufacturer accepts no
responsibility if the intended purpose of this unit is
not adhered to.
12 GB
274849_Wannenfuell-Brause-Armatur_Modell B_Content_ES.indd 12
Potential of serious to
fatal injuries.
Beware of electric shock!
Dispose of packaging and device
in an environmentally-friendly way!

Parts description

Handle*
1
Locking screw*
2
Hot / cold plaque*
3
Cartridge cover ring*
4
Cartridge lock nut*
5
Cartridge*
6
Diverter*
7
Fitting body
8
Aerator*
9
Shower connection*
10
2 Swivel nuts*
11
2 Seals
12
2 Covers
13
2 S-connectors
14
Allen key
15
* preinstalled

Technical Data

Swivel nut (water connections): G ¾
Shower hose connection:

Scope of delivery

1 Bath filling- / shower valve
2 Caps
13
2 S-connectors with silencer
2 Seals
12
1 Allen key
1 Instructions for assembly / operation
G ½
–
1 11
14
09.12.15 16:15