CARE AND MAINTTENANCE
METAL PARTS (steel)
This product has been made with resistant materials of the highest quality. With correct care and maintenance you will be able to enjoy it for many years. However, dirt or other
contaminants and bad use could damage it. Therefore, it's important to keep the product clean.
Please follow these simple instructions to keep the product in good condition:
• To clean steel and stainless steel dampen a cloth with warm water and use mild soap. Do not use abrasive soap or detergent as they could scratch the surface or make colours
fade.
• Lightly rub the product with the damp cloth. Rinse the cloth frequently, wringing out surplus water to keep it damp. Take care to rinse the product well and then dry it with
another cloth.
• If any liquid spills onto the product, remove the stains as quickly as possible.
• If you are unable to remove the stains, use a cloth to apply a metal cleaner to the surface. Read the instructions carefully, testing it first on an area that cannot be seen. Make sure
you rinse it off well and then dry with another cloth.
HPL PARTS (top)
HPL does not require special care.
• Clean with a cloth dampened in warm water and mild soap.
• Never use abrasive soap or detergent, sandpaper or steel wool since they could scratch the surface or make colours fade.
• Never use furniture polish which contains wax, since these kinds of products tend to leave a sticky layer on the surface which attracts dust and dirt.
IROKO WOOD (legs)
Iroko is a hardwood from Africa and ideal for outside use. It is very resistant to the effects of weather and ageing.
To care for the wood it is only necessary to remove dirt with a soft, damp cloth and treat the wood once a year with a restoring oil for tropical wood, following the oil manufacturer's
instructions.
IF THE PRODUCT IS USED OUTDOORS, KEEP IT CLEAN AND IN GOOD CONDITION, FOLLOWING THESE INSTRUCTIONS MORE FREQUENTLY.
WHEN THE PRODUCT IS KEPT OUTDOORS AND IS NOT USED FOR PROLONGED PERIODS, WE RECOMMEND YOU USE THE PROTECTIVE COVER.