Insignia NS-LCD42 Guia Del Usuario página 12

Best audio performance
You can enjoy the optimal sound reproduction of
TV broadcasts with a Dolby Digital amplifier that
incorporates a digital optical output, which
provides surround sound with five discrete
full-range channels plus a sixth channel for a
subwoofer. Connect a fiber optic cable directly to
the TV's digital optical audio output.
To set up Dolby Digital output:
1 Press MENU while in TV (Cable/Air) mode.
2 Use the arrow keys to select AUDIO.
3 Highlight SPDIF Type, then Dolby Digital.
Dolby Digital amplifier
with a digital optical
input
Connecting your PC to your TV
To connect your PC to your TV:
1 Make the following connection (shown in the
illustration) with a male-to-male VGA cable.
2 Connect an audio cable from the PC's audio
output jack to the AUDIO (L/R) input jacks
located directly below the VGA interface
connection on the back of the TV.
3 Press the INPUT button on the remote
control to select COMPUTER (VGA).
10
Setting the display mode
Resolution
1280 × 1024
(recommended)
1152 × 864
1280 × 960
Digital optical cable
1280 × 1024
1366 × 768
VGA cable
PC
www.insignia-products.com
Insignia NS-LCD42 42" LCD TV
Screen images have been optimized during
manufacturing for the display modes shown in
the following table. If your PC uses a standard
signal mode, the screen adjusts automatically.
Video signal: (VGA/DVI VESA Standard)
Vertical Freq (Hz) Horizontal Freq (Hz)
60
70
75
85
75
60
60
60
To adjust VGA screen settings:
1 Press the MENU button on the remote
control. The initial on-screen menu opens.
2 Press the or buttons to select VIDEO,
then press OK. The Video menu opens.
3 Press the or buttons to select VGA, then
press OK. The VGA sub-menu opens.
4 Press the or buttons to highlight the
following:
• Highlight Auto Adjust, then press OK.
The TV adjusts the screen automatically.
• Highlight H Position, then press OK.
Press the or buttons to adjust the
display horizontally.
• Highlight V Position, then press OK.
Press the or buttons to adjust the
display vertically.
• Highlight Clock, then press OK. Press the
or buttons to adjust the width of the
picture.
48.4
56.5
60.0
68.7
67.5
60.0
47.7
48.5