Dry Ironing; Spray Function - Brentwood Appliances MPI-90R Instrucciones De Operación Y Seguridad

hung garments, etc.) [Fig. 5].
Warning: the shot-steam function can only be used at high temperatures. Stop the
emission when the power light comes on, and then start ironing again only after the
light has gone off.

DRY IRONING

To iron without steam, follow the instructions in section "Steam Ironing", leaving the
steam selector (B) on position "O".

SPRAY FUNCTION

1. Make sure that there is water in the reservoir.
2. Press the spray button (D) slowly (for a dense spray) or quickly (for a vaporized
spray) [Fig. 6].
Warning: for delicate fabrics, we recommend moistening the fabric beforehand
using the spray function, or putting a damp cloth between the iron and the fabric. To
avoid staining, do not use the spray on silk or synthetic fabrics.
1
3
5
7
2
4
6
8
6