HSM Pure 420 Instrucciones De Servicio página 13

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
Shredding CDs
(only in cut size: 5.8 mm, 3.9 mm, 4.5x30 mm)
WARNING
Danger of injury by splinters!
Depending on the type of mate-
rial, splinters can fl y out of the
cutting unit while shredding CDs
and injure your eyes.
• For this reason, wear protective
goggles.
• Feed in just one CD/DVD in the middle of
the feed opening.
Shredding credit cards and store
cards
• Insert credit card in centre of the feed
opening. Dispose of the shredded mate-
rial and the waste paper separately.
Switching off the shredder
• Press the operation button.
 The "Ready for operation" indicator
goes out.
• Set mains switch at rear of paper
shredder to "0".
05/2015
Note:
To completely separate
the materials shredded,
you can insert the CD
bag supplied.
HSM Pure 420
english
Other function modes
• Permanent mode
Function: Cutting unit runs continuously.
If no material is fed in within a period of
2 minutes, the cutting unit shuts down and
the shredder switches to standby.
Start: Press the operation button for three
seconds.
Premature cancellation: Press the operation
button.
• Stand-by mode
Function: Two minutes after the last paper
feed operation, all consumers that are not
required are switched off automatically.
The „Ready for operation" indicator fl ashes
briefl y at regular intervals.
The shredder starts automatically when
paper is fed in.
13

Publicidad

Tabla de contenido
loading

Tabla de contenido