Measurement Display - boso medistar S Manual Del Usuario

Measurement display

54
After the end of the measurement, the
inbuilt valve opens automatically and
the cuff deflates rapidly.
The measured blood pressure values
(systole, diastole, pulse) are displayed
(see illustration 5).
Ill. 5
The measurement is stored automatically
(except for guest mode, see below). If the
memory store is full (30 measurements),
the oldest measurement is deleted and
the current one stored.
Note on guest mode:
If a measurement value is not be kept,
press „MEMORY" while the measured va-
Systole
lues are still on display.
mmHg
Diastole
mmHg
Pulse/min.