Intended Use; Technical Description - Dometic DC-Kit6 Instrucciones De Montaje

Set de ampliación para cc
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50

Intended use

5
Intended use
The extension kit DC-Kit6 (ref. no.: 9100300074) is suitable for equipping the
following Dometic roof air conditioners for 24 Vg driving:
• B2600, B3200
• FJ1100, FJ1700, FJ2200, FJ2600, FJ3200
The SinePower MSI2324T inverter is only designed for the cooling device in the roof
air conditioner not for the heating mode, as the heating elements take more power
than the inverter is able to generate in continuous operation.
I
NOTE
The heat pump function of the B2600 is available when used with the
inverter.
6

Technical description

The extension kit DC-Kit6 enables Dometic roof air conditioners to be used in vehi-
cles with 24 Vg. The extension kit consists of the following components:
• The ECL-103 charging current distributor with low voltage protection regulates
the power distribution between the starter battery, supply battery and light-
machine. This prevents the battery and the electronics in the vehicle from
overloading.
• The SinePower MSI2324T inverter supplies the roof air conditioner with the
required input voltage of 230 Vw. The inverter generates the 230 V voltage from
the 24 V on-board electricity supply in the vehicle.
The integrated priority circuit can be used for distributing the voltage in the
vehicle with two available power sources. If a mains voltage and voltage created
by the inverter (vehicle battery) are both connected to the device, the use of the
mains voltage has priority. If the only voltage available is that generated by the
inverter, the power supply from the battery is used. This ensures that the limited
power of the battery is not used unnecessarily.
• The MCR-9 remote control can switch the inverter on and off.
10
DC-Kit6
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido