Audiolab MAGNA 121A Manual Del Usuario página 6

4. CONNECTION PLATE
Make your initial connections with all the equip-
ment powered off, and ensure that all the main
volume controls are turned completely down.
Two Active Subwoofers & Two Active Satellite
Speakers
1. Connect one side of the signal cable at your
mixer into the output Left/Right and the other
side of the cable into the Line Input of your
active subwoofers.
2. Connect one side of another signal cable at
your active subwoofers into Link Left/Right or
Out Left/Right, and the other side of the cable
into the Line Input Left/Right of your active
Line
Input
Pole
P. 6
AUDIOLAB Magna 121A -
English version
Main Out Left
Line in
Left/Mono
Mixer
satellite speakers. *If you connect into Out
Left/Right and press Bypass switch, the 80Hz
HPF will be activated.
3. Connect the power cord to main.
4. Turn ON your mixer first, the the active
speaker cabinets.
5. Turn up the volume control of the active
speaker cabinets.
6. Use PFL function to get the proper input level
for the mixer, and adjust the Main Mix Level
control to reach the desired output level.
7. After use, turn off your active speaker cabi-
nets, then the mixer.
Main Out Right
Line in
Right/Mono
Line
Input
Pole