Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell MKS 130 Ec Manual De Instrucciones Original

2.3 Technical data

Universal motor,
interference suppressed
Power input (nominal load)
Current at nominal load
Saw blade speed during idling
Saw blade speed at normal load
Cutting depth
Maximum cutting depth 30°/45°/60°
Tilting saw unit
Saw blade diameter max/min
Saw blade body thickness
Tool cutting width
Saw blade mounting hole
Hose connector diameter
Weight without mains cable, with parallel guide fence
Dimensions (W x L x H)

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1 and EN 60745-2-5:
Machining
The noise measurement was recorded using the saw blade included in the standard equipment.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.

2.5 Vibration specifications

The typical hand-arm vibration is less than 2.5 m/s

2.6 Scope of supply

Portable circular saw MKS 130 Ec complete with:
1 carbide-tipped circular saw blade Ø 330 mm (13 in.), 24 teeth
1 riving knife / splitter (thickness 2.2 mm / 3/32 in.)
1 hose connector
1 parallel guide fence
1 service tool in bracket on the machine
1 operating manual
1 folder "Safety Instructions"
radio and TV
Sound power level
111 dB (A)
230 V~, 50 Hz
2500 W
10.8 A
1000 - 2000 rpm
890 - 1820 rpm
50 - 130 mm (2 – 5 1/8 in.)
115.6/94/65 mm (4 9/16, 3 11/16, 2 9/16 in.)
0 - 60°
330/304 mm (13, 11 7/8 in.)
2.2 mm (3/32 in.)
3.2 mm (1/8 in.)
30 mm
58 mm (2 9/32 in.)
12 kg (26.5 lbs)
345 x 610 x 385 mm (13 19/32 x 24 1/64 x
15 5/32 in.)
Workplace-related emission value
100 dB (A)
.
2
-18-