Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
8.5 Adjust the swing away legrest
(FIG.6)
8.6 Adjust the elevating legrest (OPTIONAL)
8.7 Install/remove the 30cm wheels (only for GO!)
Place the caster into the hole on the wheelchair frame
•
To adjust the length of the footrest, unlock
the safety lever unlock the rear safety lever,
then press the push button, slide the tube until
the desired hole, then relock the safety lever.
•
To adjust the length of the footrest, unlock
the safety lever unlock the rear safety lever,
then press the push button, slide the tube until
the desired hole, then relock the safety lever.
(Fig.7) (Rif.P)
•
Adjust the tilt pulling outward from the
legrest tube, push the lever (Fig.7)
(Rif.L), to bring back zero the tilting degree
(FIG.7)
Wheels with fixed axle (only for GO!)
•
Place the small wheel and block it with the nut
•
To remove the wheel, unscrew the nut
and remove the small wheel
(FIG.8)
Image for illustrative purposes only
7
(FIG.6)
Publicidad
Capítulos
Tabla de contenido
