Fulcrum SPEED 40T Manual Del Usuario página 18

2.1 - USE OF THE ADAPTER FOR INFLATING (only for Racing Speed XLR H80 mm / Speed 55T)
Unscrew the valve A of the tubular (Fig. 1.2), by using if necessary the
provided wrench, and remove the valve (Fig. 1.3).
A
1.2
- Insert the adapter into the small tubes B (Fig. 1.4) and screw it thorou-
ghly by using exclusively the provided wrench C (Fig. 1.5).
B
1.4
A
1.3
C
1.5
- Insert the valve A into the adapter (Fig. 1.6) and screw it strongly by
using exclusively the provided wrench C (Fig. 1.7).
A
1.6
- Proceed with inflation of the tubular (follow the instructions on paragraph
2.2).
- To deflate the tubular, unscrew the valve and press it against the mecha-
nism inside the adapter.
®
C
1.7
5