How To Use The Appliance - HJM T-143 Instrucciones De Uso

Tostador T-143_Maquetación 1 01/03/16 12:42 Página 18
SELECTING THE BROWNING LEVEL
GRADES

HOW TO USE THE APPLIANCE

Set the control knob to the suitable position, put the bread slice into
the toast slots (the thickness of the bread slice cannot be 15mm less
than the width of the slot, otherwise, the slice cannot get stuck.) and
press down the lever, then the toaster begins to toast. As soon as the
toasting cycle is completed (that is, the bread has been exactly brow-
ned as preset.), the slices of bread will automatically be ejected.
SUGGESTION:
Before first use it is suggested having the appliance without
bread operated with the control knob set to grade 3 and the
lever in down position to remove the heating element protection
finish. At this time, the appliance will smoke. This is normal. It
is recommended to have a good ventilation of air. After the first
heating, let it cool down naturally before being used again.
CLEANING
- Before cleaning, switch off and unplug the appliance and have it
cool down.
- Remove the crumbs from the browning slots and grids with the
appliance not tilted. Then, open the door, clean away the crumbs
and put the door back to the appliance.
- Clean away crumbs from toaster.
- Remove the crumbs from the browning slots and grids with the
appliance not tilted. Then, slide out the tray, clean it and put it again
into the appliance.
1-3
3-5
5-7
- 18 -
BREAD TYPE
Thin bread slice
General bread
Frozen bread
E
N
G
L
I
S
H