Storz IMAGE1 S TH112 HX FI Manual De Instrucciones página 47

43
Hinweise zur
elektromagnetischen
Verträglichkeit (EMV)
Recommended separation distances between portable and mobile RF communications equipment and
The HX camera heads are intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or user of
the HX camera heads can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications
equipment (transmitters) and the HX camera heads as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output power
of transmitter
[W]
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance D in meters (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
1 NOTE: At 80 MHz and 800 MHz, the separation distance for higher frequency range applies.
1 NOTE: These guidelines may not apply in all situations. The propagation of electromagnetic quantities is affected by absorptions and reflections of
structures, objects and people.
Information on
electromagnetic
compatibility (EMC)
Table 6
the HX camera heads
Separation distance d [m]
as a function of the transmitter frequency
80 MHz to 800 MHz
150 kHz to 80 MHz
f
0.12
0.38
1.2
3.8
12
Indicaciones sobre
compatibilidad
electromagnética (CEM)
800 MHz to 2.5 GHz
f h
0.12
0.38
1.2
3.8
12
0.23
0.73
2.3
7.3
23