Maintenance, Storage And Calibration - HealthSmart 18-545-000 Guia Del Usuario

FCC Statement and EMC Compatibility
15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.

Maintenance, Storage and Calibration

Maintenance:
1. To ensure accurate measurements, keep the infrared
sensor and distance sensor tip clean and free of scratches.
Finger prints or dirt will affect the accuracy of the
thermometer.
2. To clean the infrared sensor and distance sensor: gently
wipe the sensors with a cotton swab slightly moistened
with alcohol and immediately wipe dry with a clean
cotton swab (Fig 1). The thermometer can be used after
the alcohol dries.
3. Use a soft dry cloth to clean the body of the thermometer
(Fig 2).
4. Never clean the thermometer with an abrasive cleanser,
thinner, benzene or submerge the thermometer into water or other liquids.
Storage:
1. After each use clean the thermometer.
2. Store in a clean dry place at room temperature. NEVER leave the
thermometer exposed to direct sun, high temperatures, humidity, fire,
flames, shocks or hits.
3. If you do not use the thermometer for a long time, take out the batteries.
Calibration:
1. The thermometer is factory-calibrated. If the thermometer is used according
to the user manual, periodic calibration is not required. Do not try to modify
or reassemble the thermometer.
13
FIG. 1
FIG. 2